Xantech Universal Micro Link Extended Range Receiver - Black

Roll over image to zoom in

Tech specs

Infrared modulation frequency bandwidth: 25 - 60 kHz
IR reception range: Up to 120 feet, depending on remote control output strength and ambient conditions
Reception angle: 55 degrees off axis for 50% range reduction
Cable requirements: 3-conductor. Use 24 gauge up to 200', 22 gauge up to 600' 20 gauge up to 2000', 18 gauge up to 5000' - unshielded OK
Max. transmission length: 1 mile using 18 gauge wire
Maximum current output: 100mA
Power requirements: +12VDC, 20mA

Box Contents

ML Series IR Receiver
784-44 Connecting Block
x4 283D Designer Emitters
871ERGPS Power Supply

Xantech Universal Micro Link Extended Range Receiver - Black

Name: Xantech Universal Micro Link Extended Range Receiver - Black
Brand: Xantech
SKU: ACML95
Availability: InStock

XantechACML95

In Stock

Quantity:

The Micro Link IR Receiver is a small peep-hole style infrared repeater assembly. The Micro Link IR Receiver is equipped with a 7-foot cable and a 3.5mm stereo mini plug, which is plugged directly into the "IR RCVR" jack on the connecting block, such as the models 789-44, CB60, and 791-44. The Micro Link IR Receiver is primarily intended for use in installations where the connecting block is within reach of its 7-foot cable - as when installing the Micro Link IR Receiver in a cabinet where the controlled equipment is behind closed doors.

Benefits

Small size; mounts in 1/2" diameter hole. 2 inches deep (50mm)
Quick-Connect 3.5mm Stereo Mini Plug on 7ft. cable for direct plug-in to Xantech Connecting Blocks
Works in normal 3-wire mode (12VDC, IR, GND)
Green Talkback LED for System Verification

Recover password

Xantech Universal Micro Link Extended Range Receiver - Black

You may also like

Recently viewed